The TBM will be used in the Angat Water Transmission Improvement Project, in the Philippines.

The machine has the following main characteristics:

- 4.94 m diameter Cutterhead with 31 disc cutters
- 1250 kW Main drive 4195 kNm working torque
- Main thrust system 26000 kN
- Auxiliary thrust system 22800 kN

Seli Technologies designed the machine and provided after-buy technical assistance for the entire excavation.

- 5.67 diameter cutterhead with 37 19″ cutters
- 2205 kW main drive with 2900 kNm working torque
- Main thrust system 22643 kN
- Auxiliary thrust system 13511 kN
- Modular backup system 1.5 rings capable

The machine is a **Dual Mode TBM**: it can excavate performing muck removal via a belt conveyor, or in Earth Pressure Mode using a screw conveyor.

It has the following main characteristics:

6.68 m diameter Cutterhead with 45 disc cutters

1500 kW Main drive 5468 kNm working torque

Thrust system force: 41600 kN

Articulation system force: 37400 kN

Maximum operating pressure: 5.5 bar

The machine, that includes all back-up structures and equipment, is available for sale or to be modified for existing projects.

The current machine specifications are the following:

- Excavation diameter: 6.79 or 7.4 m (two sets of shields and two cutterheads are available)
- Cutterhead with scrapers or 17” cutter discs
- 1600 kW Main drive: 6967 kNm working torque
- Thrust system force: 50600 kN
- Front articulation system force: 28200 kN
- Rear articulation system force: 12200 kN
- Maximum operating pressure: 4 bar

The machine (TBM.DSU.0493.153) main specifications are the following

- Cutterhead: 4.93 m diameter with 30 19″-diameter cutters
- Main drive: 1890 kW of installed power, working torque 2550 kNm
- Main thrust system: 26000 kN
- Auxiliary thrust system: 33000 kN

]]>

The TBM (DSU.0630.156) has the following main characteristics:

- 6.30 m diameter Cutterhead with 41 19″ cutters
- 2205 kW Main drive 2940 kNm working torque
- Main thrust system 24150 kN
- Auxiliary thrust system 32800 kN

The machine has the following main characteristics:

- 4.94 m diameter Cutterhead with 31 disc cutters
- 1250 kW Main drive 4195 kNm working torque
- Main thrust system 26000 kN
- Auxiliary thrust system 22800 kN

The machine (TBM.DSU.0493.153) main specifications are the following

- Cutterhead: 4.93 m diameter with 30 19″-diameter cutters
- Main drive: 1890 kW of installed power, working torque 2550 kNm
- Main thrust system: 26000 kN
- Auxiliary thrust system: 33000 kN

See also the TunnelTalk article at Double Shield TBM for Thailand water tunnel

SELI Technologies provided new vital components for the screw conveyor (drive unit and part of the auger), as well as field service support for the machine which was originally supplied by SELI in cooperation with Kawasaki.

The machine used in this project has the following main characteristics:

- 6.43 diameter cutterhead with 42 17″ cutters
- 1400 kW main drive with 5500 kNm working torque
- thrust system 10000 kN
- Portal-type backup system